Original Sizes; Specifying The Original Size - Sharp MX-C312 Operation Manual

ORIGINAL SIZES

SPECIFYING THE ORIGINAL SIZE

The original size is set in "Default original size setting" in the system settings (administrator), and the setting appears in
the [Original] key. This section explains the procedure for specifying the setting when the original size is different from
size shown in the [Original] key.
Touch the [Original] key and perform the following.
Specifying an AB original size
(1)
Original
A5 216x330
B5 216x340
A4 216x343
Size Input
Specifying an inch original size
(2)
Original
5½x8½ 8½x14
2
8½x11 8½x13
5
8½x13
Size Input
System Settings (Administrator): Default original size setting
Set this if you frequently use a particular original size. The set size will appear in the [Original] key.
When this setting is configured, changing the original size can be omitted.
(2)
OK
16K
AB
Inch
Custom Size None
(1)
(3)
OK
AB
Inch
Custom Size None
(1) Touch the appropriate original size key.
(2) Touch the [OK] key.
(1) Touch the [AB
(2) Touch the appropriate original size key.
(3) Touch the [OK] key.
2-29
COPIER
Inch] key.
Contents