Changing The "No Service Area" Alert; Changing The "Hand Over" Tone - Kyocera R12T Owner's Manual

Using Advanced Functions

Changing the "NO SERVICE AREA" alert

You can have the phone alert you when you have moved outside the
service area and that the signal reception has deteriorated. The default
setting is ON-1. You can adjust the setting while waiting for a call.
1
Press and hold down the
When "F_" appears in the information area of
the display release the key.
2
Press the
"ON-1 OFF-3" is displayed and the current
setting blinks.
3
Press the
: An alert tone is emitted.
: An alert tone is not emitted.
4
Press the
The phone returns to the display before the
key was pressed.
Even if you do not press the
play will be cleared after 20 seconds.

Changing the "HAND OVER" tone

Your phone has a function, called HAND OVER, that searches for a
stronger reception signal if the current signal becomes weak. You can
check and adjust the settings for the tone that is emitted when this HAND
OVER function operates. The default setting is OFF-3. You can adjust
the setting while waiting for a call.
1
Press and hold down the
When "F_" appears in the information area of
the display release the key.
2
Press the
"ON-1 OFF-3" is displayed and the current
setting blinks.
32
R12-PHS_Body.pm6
key.
key.
or key.
key.
key, the dis-
key.
key.
32 7/24/00, 2:16 PM