Inserting A Pause Into The Telephone Number - Kyocera R12T Owner's Manual

5
Close the flip cover.
You can also terminate the connection by
closing the flip cover.
Five seconds after the flip cover is closed,
the phone will emit a click and the call is dis-
connected.
For the five seconds after the flip cover is closed,
the connection to the other party is connected
but the sound is muted. If you close the flip cover
by mistake, you can continue the call if you open
the flip cover within the five seconds, provided
the other party has not hung up.

Inserting a pause into the telephone number

You can insert a pause into the telephone number you want to dial.
1
Enter the telephone number.
2
Press the
to enter the pause. A "–" is inserted into
the number shown on the display.
Pressing the
causes "P" to be displayed.
• If you press the
"–" is inserted into the number.
3
Enter any other numbers that are need-
ed after the pause.
4
Press the key.
The numbers up to the point you inserted the
pause are dialed.
When the other party answers, press the
key again.
The numbers entered after the pause are dialed.
Notes:
• You cannot insert a pause as the first digit of a number.
• You cannot insert two, or more, pauses in succession into the
number.
• If the reception signal become weak during a call, a warning tone
will be emitted.
R12-PHS_Body.pm6
key at the point you want
key a second time
key once, a hyphen
9
Basic Operations
Hyphen
Pause
9
7/24/00, 2:16 PM