Changing The Ring Pattern - Kyocera R12T Owner's Manual

Using Advanced Functions
Pressing the
the volume. If the volume set-
ting is High, then pressing the
volume setting.
4
Press the
The ring pattern stops and the phone returns
to the display before the
Even if you do not press the
pattern will stop one ring pattern has finished.
• You can adjust the volume for the ring pat-
tern when you receive a call by pressing
the or
playing the ring pattern.

Changing the ring pattern

You can check and adjust the settings for the ring pattern that is used to
inform you of incoming calls. The default setting is 01. You can adjust the
setting while waiting for a call.
1
Press and hold down the
When "F_" appears in the information area of
the display release the key.
2
Press the
The current ring pattern setting is displayed.
3
Press the
ring pattern.
You can set the ring pattern to one of four
tones, or 20 melodies.
Pressing the
phone to play the selected ring pattern.
Pressing the
the phone to switch to the next ring pattern.
01 02 03
28
R12-PHS_Body.pm6
key increases
key will not change the
key.
key was pressed.
key, the ring
key while the phone is
key.
key.
or key to change the
or key causes the
or key again causes
04 ~ 21 22 23 24
28
Ring pattern
7/24/00, 2:16 PM