Using Two-Touch Dialing - Kyocera R12T Owner's Manual

Pressing the number keys.
The location number and its telephone num-
ber is displayed for the number you pressed.
For example:
To select location number 05
Press the
If there is no telephone number stored in the location number you
entered, the location number blinks. The display will return to the
previous screen after 2 seconds.
3
Press the key.
The phone dials the displayed number.

Using two-touch dialing

For numbers stored in locations 01 to 09 of the phonebook you use the
two-touch dialing to dial them quickly and easily.
You can use two-touch dialing while waiting for a call.
Example: To dial the telephone number stored in location number 05.
1
Press and hold down the
"5" appears on the display then the telephone
number stored in location 05 is displayed.
After the location number and telephone num-
ber have been displayed, release the
2
Press the key to dial the number.
Note:
If you press a number key that does not have a stored telephone
number, the two-touch function will not work.
R12-PHS_Body.pm6
Advanced Dialing Services
key then the key.
key.
key.
17
17
7/24/00, 2:16 PM