Setting Dial Lock; Releasing Dial Lock - Kyocera R12T Owner's Manual

Advanced Dialing Services

Setting dial lock

1
Press and hold down the
When "F_" appears in the information area of
the display release the key.
2
Press the
"PASS ____" appears in the information area
of the display.
3
Use the number keys to enter your
password.
The numbers you enter for the password are
displayed as "-" (hyphen) on the display.
The indicator lights in the information area
of the display and dial lock is active.
• While dial lock is active, "PASS _ _ _ _ " ap-
pears in the information area of the dis-
play when any of the keys on the phone
are pressed. If you do not enter the cor-
rect password, "Error" appears in the in-
formation area of the display and you can
not use the phone.
• You can still receive calls normally while
dial lock is active.
• You can still call 191 and 199 while dial
lock is active. Dial 191 or 199 then press
the key.

Releasing dial lock

1
Use the number keys to enter your
password.
The indicator in the information area of the
display goes out and dial lock is released.
• If you make a mistake entering the pass-
word, "Error" appears in the information
area of the display.
20
R12-PHS_Body.pm6
key.
key.
20
Lit
7/24/00, 2:16 PM