Connecting Parties - Siemens OpenScape 35G User Manual

Step by step
Complete Xfer?
]
User
Configuration
Connected calls?
Allow call joining = Yes
Yes
Save & Exit

Connecting parties

You can connect the first party with the party you con-
sulted, clearing down your connection to both parties in
the process.
Prerequisite: You are conducting a consultation call
 page 50 and call joining is allowed  page 53.
f
Select and confirm the option shown.
The active and held calls are joined. You are disconnect-
ed from the call.
or Connect by hanging up
or Speaker Replace the handset or, if you are in speakerphone
mode, press the loudspeaker key. The other two parties
are now connected to one another.
Allowing call joining
z You can also configure this setting via the Web interface
 page 190.
Settings Press the key shown.
Confirm.
j
if nec. Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
f
Select and confirm the option shown.
l
Select and confirm the option shown.
l
Select and confirm the option shown.
Basic functions
53