Siemens OpenScape 35G User Manual page 86

Enhanced phone functions
Step by step
Deflect
?
Complete Xfer
]
86
Deflecting a second call
Prerequisite: You are conducting a call and call waiting
is allowed ( page 87).
m
Select and confirm the option shown.
If a destination phone number is stored ( page 74),
you can select and confirm it. The call is deflected.
or If you did not set a phone number when programming
call deflection, you are now prompted to enter a desti-
nation phone number for call deflection.
j
Enter and confirm the destination phone number.
The second call is deflected to the destination speci-
fied. You are reconnected with the first party.
Connecting parties
Select and confirm the option shown. The other two
parties are now connected to one another. You can now
hang up or dial another number for instance.
or Connect by hanging up
Prerequisite: Connecting by hanging up is activated
(ask your administrator) and "Switch assignment" must
be set to "Yes" ( page 88). Before you can be connect-
ed by hanging up you must have toggled at least twice
( page 51).
or Speaker Replace the handset or, if you are in speakerphone
mode, press the loudspeaker key. The other two parties
are now connected to one another.