Siemens OpenScape 35G User Manual page 99

Step by step
Exit Conf?
^
End Conf?
User
Configuration
Connected calls?
Allow conferences = No
Yes
Save & Exit
Ending a local conference
Allowing call partners to continue a conference af-
ter you exit
Prerequisite: The ""Allowing joining in a local confer-
ence"  page 100" function is activated.
l
Select and confirm the option shown in the menu. Both
call partners remain connected. You are disconnected
from the conference call.
or
or Speaker Replace the handset or, if you are in speakerphone
mode, press the loudspeaker key. Both call partners re-
main connected. You are disconnected from the confer-
ence call.
Disconnecting a party
f
Select and confirm the option shown in the menu.
Both connections are cleared down – the conference is
cleared down.
Allowing a local conference
This option allows or blocks the "Conference" function.
z You can also configure this setting via the Web interface
 page 190.
Settings Press the key shown.
Select and confirm the option shown.
j
if nec. Enter and confirm the user password.
Select and confirm the option shown.
Select and confirm the option shown.
m
Select and confirm the option shown.
l
Select and confirm the option shown.
l
Select and confirm the option shown.
Enhanced phone functions
99