Connecting Parties - Siemens OpenStage 40 Operating Manual

Step by Step
Complete Xfer?
]
User
Configuration
Connected calls
Allow call joining
Yes
Save & Exit

Connecting parties

You can connect the first party with the party you con-
sulted, clearing down your connection to both parties in
the process.
Prerequisite: You are conducting a consultation call
page 43 and call joining must be allowed
Select and confirm the option shown in the active con-
nection's context menu.
The active and held calls are joined. The active call and
the consultation call are cleared down.
or Connect by hanging up
n
or
Replace the handset or, if you are in speakerphone
mode, press the loudspeaker key. The other two parties
are now connected to one another.
Allowing call joining
z You can also configure this setting via the Web interface
page 136.
N
Press the key shown.
Confirm.
j
if nec.
Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown.
Select and confirm the option shown in the context
menu.
Confirm.
Basic functions
page 45.
45