Direct Station Selection Keys; Calling A Station Directly - Siemens OpenScape 35G User Manual

Step by step

Direct station selection keys

Apart from line keys, administrator can also configure
direct station selection (DSS) keys. You can use a DSS
key to call an internal station directly, pick up calls for
this station or forward calls directly to it.

Calling a station directly

You cannot use DSS if the user is on another call (flash-
ing LED).
Calling from the idle menu
S
Press the relevant DSS key.The key lights up and a con-
nection is established.
administrator can configure the DSS key so that
the connection is also established when the DSS
station has activated do-not-disturb or call for-
warding.
Consultation with the DSS station
Prerequisite: You are conducting a call and administra-
tor has configured the DSS key for consultation.
S
Press the relevant DSS key for the consultation. The key
lights up and a connection is established.If the station
answers, you can toggle, transfer the first call or initiate
a conference.
If administrator has configured transfer instead
of consultation, you can only transfer the current
call to the DSS station.
Making calls with multiple lines
113