Immediate Dialing - Siemens OpenScape 35G User Manual

Step by step
User
Configuration
Outgoing calls
Immediate dialing = No
Yes
Save & Exit

Immediate dialing

Immediate dialing should only be activated if adminis-
trator has configured and approved a dial plan.
Immediate dialing is deactivated by default. For this rea-
son after entering the number you must either confirm
the "Dial" option or wait until the dial delay expires to set
up the connection. If Immediate dialing is configured,
your call is automatically dialed as soon as the string en-
tered matches an entry in the dial plan.
Activating or deactivating immediate dialing
z You can also configure this setting via the Web interface
 page 190.
Settings Press the key shown.
Select and confirm the option shown.
j
if nec. Enter and confirm the User password.
Select and confirm the option shown.
Select and confirm the option shown.
f
Select and confirm the option shown.
l
Select and confirm the option shown.
l
Confirm.
Basic functions
47