Using Autodial Delay - Siemens OpenScape 35G User Manual

Step by step

Using autodial delay

A number is automatically dialed after a set delay start-
ing from the entry of the number's last digit. The auto-
dial delay can be used:
• when dialing in idle mode
• Consultation
• when transferring an answered call.
The delay can be reduced by performing one of the fol-
lowing activities:
OK •
Pressing the OK key. This always works.
^
• lifting the handset. This only works if the phone num-
ber was entered when the phone was idle or if it was
entered for a consultation call when the handset was
off hook.
Speaker •
pressing the loudspeaker key. This only works if the
phone number was entered when the phone was
idle and the loudspeaker key was not lit or if the
phone number was entered for a consultation call
and the loudspeaker key was not lit.
If an emergency number is preset by your admin-
istrator, the autodial delay for this phone number
is reduced to one second.
Automatic dial delay does not work if you are us-
ing a dial plan and Immediate dialing is config-
ured (see  page 47). The number is automati-
cally dialed as soon as the string entered
matches an entry in the dial plan.
Enhanced phone functions
95