Tray Paper Settings - Ricoh Aficio 2232C Operating Instructions Manual

Tray Paper Settings

❖ ❖ ❖ ❖ Paper Tray Priority: Copier (copier/Document Server)
You can specify the tray to supply paper for output.
Note
❒ Default: Tray 1
❒ When optional paper tray unit is installed, "Tray3" and "Tray4" is dis-
played.
❒ When optional LCT is installed, "LCT" is displayed.
❖ ❖ ❖ ❖ Paper Tray Priority: Facsimile (facsimile)
You can specify the tray to supply paper for output.
Note
❒ Default: Tray 1
❒ When optional paper tray unit is installed, "Tray3" and "Tray4" is dis-
played.
❒ When optional LCT is installed, "LCT" is displayed.
❖ ❖ ❖ ❖ Paper Tray Priority: Printer (printer)
You can specify the tray to supply paper for output.
Note
❒ Default: Tray 1
❒ When optional paper tray unit is installed, "Tray3" and "Tray4" is dis-
played.
❒ When optional LCT is installed, "LCT" is displayed.
❖ ❖ ❖ ❖ Tray Paper Size:Tray 2–4
Select the size of the paper loaded in the paper tray.
Note
❒ Tray 1 uses A4K paper exclusively. You cannot specify any other paper
size.
❖ ❖ ❖ ❖ The paper sizes you can set for trays are as follows:
• Auto Detect, A3L, B4 JISL, A4K, A4L, B5 JISK, A5K
• 11"×17"L, 8
1
8 / "×13"L, 7
4
Important
❒ If the specified paper size differs from the actual size of the paper loaded
in the paper tray, a misfeed might occur because the correct paper size was
not detected.
1 1
/ "×14"L, 8 / "×11"K, 8
2 2
1 1
/ "×10 / "L
4 2
Settings You Can Change with User Tools
1
/ "×11"L, 8"×13"L, 8
2
4
1
/ "×13"L,
2
53