Ricoh Aficio 2232C Operating Instructions Manual page 64

User Tools (System Settings)
❖ ❖ ❖ ❖ Output: Printer (printer)
You can specify the tray to which documents are delivered.
Note
❒ Default: Standard tray
❒ The output trays set on the printer driver have priority over the output tray
specified above.
❒ You cannot use the external tray as the output tray when making a 2 Sided
copy.
❒ For details about output trays, see p.51 "Output: Copier (copier)".
❖ ❖ ❖ ❖ <F/F4>Size Setting
Currently three types of F size are available: 8
8"×13"L. The ADF or exposure glass cover sensor cannot distinguish these
4
three types of originals. This function sets the F size from the ADF or expo-
sure glass cover sensor. Auto Paper Select or Auto Reduce/Enlarge can be
used for F size originals based on this setting.
Note
❒ Default: 8
Output tray settings
Limitation
❒ You cannot interrupt the current stapling job even if a stapling job is specified
by a different function.
❒ When the 2 tray Finisher or booklet finisher is installed and stapling or shift-
sorting is specified for a job, the job will be delivered to the finisher shift tray,
finisher shift tray 1 or finisher shift tray 2 regardless of the output tray speci-
fied.
❒ If you use the bypass tray as the output tray, you cannot use the finisher out-
put tray, left tray 1 or left tray 2 as output trays.
52
" × 13"L
1
/
2
1 1
/ "×13"L, 8 / "×13"L and
2 4