Power Steering; 3.6L Engine - Jeep 2014 Grand Cherokee Owner's Manual

440 STARTING AND OPERATING

POWER STEERING

3.6L Engine

Your vehicle is equipped with an electro-hydraulic power
steering system that will give you good vehicle response
and increased ease of maneuverability in tight spaces.
The system will vary its assist to provide light efforts
while parking and good feel while driving. If the electro-
hydraulic power steering system experiences a fault that
prevents it from providing power steering assist, then the
system will provide mechanical steering capability.
CAUTION!
Extreme steering maneuvers may cause the electri-
cally driven pump to reduce or stop power steering
assistance in order to prevent damage to the system.
Normal operation will resume once the system is
allowed to cool.
If the "SERVICE POWER STEERING" message
and a flashing icon are displayed on the EVIC
screen, it indicates that the vehicle needs to be
taken to the dealer for service. It is likely the
vehicle has lost power steering assistance. Refer to "Elec-
tronic Vehicle Information (EVIC)" in "Understanding
Your Instrument Panel" for further information.
If the "POWER STEERING HOT" message and an icon
are displayed on the EVIC screen, it indicates that
extreme steering maneuvers may have occurred, which
caused an over temperature condition in the power
steering system. You will lose power steering assistance
momentarily until the over temperature condition no
longer exists. Once driving conditions are safe, then pull
over and let vehicle idle for a few moments until the light
turns off. Refer to "Electronic Vehicle Information
(EVIC)" in "Understanding Your Instrument Panel" for
further information.