Jeep 2014 Grand Cherokee Owner's Manual page 537

NOTE:
• Steps 1 through 5 are requirements that must be met
prior to pressing the "N" button, and must continue to
be met until the shift has been completed. If any of
these requirements are not met prior to pressing the
"N" button or are no longer met during the shift, the
"N" indicator light will flash continuously until all
requirements are met or until the "N" button is re-
leased.
• The ignition switch must be in the ON/RUN position
for a shift to take place and for the position indicator
lights to be operable. If the ignition switch is not in the
ON/RUN position, the shift will not take place and no
position indicator lights will be on or flashing.
• A flashing "N" position indicator light indicates that
shift requirements have not been met.
STARTING AND OPERATING 535
5