Jeep 2014 Grand Cherokee Owner's Manual page 422

420 STARTING AND OPERATING
6. Using a ballpoint pen or similar object, press and hold
the recessed transfer case "N" button (located by the
selector switch) for one second.
NEUTRAL (N) Switch
7. When the "N" indicator light turns off, release the "N"
button.
8. After the "N" button has been released, the transfer
case will shift to the position indicated by the selector
switch.
9. Shift the transmission into PARK. Turn the engine
OFF.
10. Release the brake pedal.
11. Disconnect vehicle from the tow vehicle.
NOTE:
• Steps 1 through 5 are requirements that must be met
prior to pressing the "N" button, and must continue to
be met until the shift has been completed. If any of
these requirements are not met prior to pressing the
"N" button or are no longer met during the shift, the
"N" indicator light will flash continuously until all
requirements are met or until the "N" button is re-
leased.