Jeep 2014 Grand Cherokee Owner's Manual page 534

532 STARTING AND OPERATING
NEUTRAL (N) Switch
6. After the shift is completed and the "N" light stays on,
release the "N" button.
7. Shift the transmission into REVERSE.
8. Release the brake pedal for five seconds and ensure
that there is no vehicle movement.
9. Shift the transmission back into "N"
10. With the transmission and transfer case in "N", press
and hold the ENGINE START/STOP button until the
engine turns off. Turning the engine off will auto-
matically place the transmission in PARK.
11. Press the ENGINE STOP/START button again (with-
out pressing the brake pedal), if needed, to turn the
ignition switch to the OFF position.
12. Firmly apply the parking brake.
13. Attach the vehicle to the tow vehicle using a suitable
tow bar.
14. Release the parking brake.