Jeep 2014 Grand Cherokee Owner's Manual page 342

340 UNDERSTANDING YOUR INSTRUMENT PANEL
• ParkView® Backup Camera Static Gridlines — If
Equipped
Your vehicle may be equipped with the ParkView® Rear
Back Up Camera Static Guidelines that allows you to see
straight grid line overlay over the ParkView Back up
camera display whenever the shift lever is put into
REVERSE. The image will be displayed on the radio
touchscreen display along with a caution note to "check
entire surroundings" across the top of the screen. After
five seconds, this note will disappear. To make your
selection, touch the "ParkView Backup Camera Static
Gridlines" soft-key, until a check-mark appears next to
setting, indicating that the setting had been selected.
Touch the back arrow soft-key to return to the previous
menu.
• ParkView® Backup Camera Delay
When the vehicle is shifted out of REVERSE (with camera
delay turned OFF), the rear camera mode is exited and
the navigation or audio screen appears again. When the
vehicle is shifted out of REVERSE (with camera delay
turned ON), the rear view image with dynamic grid lines
will be displayed for up to 10 seconds after shifting out of
"REVERSE" unless the forward vehicle speed exceeds
8 mph (12 km/h), the transmission is shifted into
"PARK" or the ignition is switched to the OFF position.
To set the ParkView® Backup Camera Delay press the
"Controls" soft-key, the "settings" soft-key, then the
"Safety & Driving Assistance" soft-key. Press the
"Parkview Backup camera Delay" soft-key to turn the
ParkView® Delay ON or OFF.