Scan Data Transmission Format - Symbol LT 1806 Product Reference Manual

LT 1806 Product Reference Guide: Parameter Menus

Scan Data Transmission Format

To select a scan data transmission format:
1. Scan the SCAN DATA OPTIONS bar code.
2. Scan the bar code corresponding to the desired converted data format.
3. Scan ENTER.
Note: If you select an option using a prefix and/or suffix,
see the following Prefix/Suffix parameters to set
the prefix and/or suffix value(s).
SCAN DATA OPTIONS
STANDARD: <SCAN DATA>
OPTION 1: <SCAN DATA> <SUFFIX>
5-33