Symbol LT 1806 Product Reference Manual page 30

LT 1806 Product Reference Guide: Programming the LT 1806
PARAMETER
Xmit "No Decode"
Character
UPC/EAN
Supplementals
Beep After Good Decode Enable, Disable
Beeper Volume
Trigger Mode
(triggered models only)
Decode Redundancy
Scan Data Transmission
Format
Prefix to Decoded Data
(On-board hosts)
Suffix to Decoded Data
(On-board hosts)
Prefix (Synapse)
Suffix (Synapse)
Intercharacter Delay
(Communication
Delays& Timeouts)
UPC-E/UPC-A Preamble System Character, System Character &
Buffer Code 39 Symbols
(Scan and Store)
Note: Suffix and prefix selections are based on a chart of
Table 4-1. Parameter Selections (Continued)
SELECTIONS AVAILABLE
Enable, Disable
No Supplemental, Supplemental Only,
Autodiscriminate
Low, Full
Triggered, Triggerless
Level 0, Level 1, Level 2
Standard, Options 1 through 3
None, User's Choice (1 character)
None, User's Choice (1 character)
Any ASCII Character
Any ASCII Character
00 to 99 ms
Country Code, None
Enable, Disable
selectable characters. See Table 4-3 and
4-12
DEFAULT
Disable
No Supplemental
Enable
Full
Triggered
Level 0
Standard
None
None
None
None
None
System Character
Disable
Table 4-4.