Checking the Electric Heater Usage
In order to check the electric heater usage using the wired
remote controller, hold down the
same time for 5 seconds.
1
The menu will display .
Press the
button until
2
Press the
button.
The electric heater usage will be displayed.
Value
Use (Indoor unit Dip switch K8: Off)
Not Use (Indoor unit Dip switch K8: On(default))
3
Press the
button to exit.
You will move to the menu selection display.
Note
P ress the
without setting.
and
is displayed.
Data
button anytime during setup to exit
buttons at the
Menu No.
Set value
25
E-