Monitoring The Filter Time Setting - Samsung MWR-WH00 Installation Manual

Monitoring the Filter Time Setting

In order to monitor the filter time setting using the wired
remote controller, hold down the
same time for 5 seconds.
1
The menu will display .
Press the button until is displayed.
2
Press the button.
The current indoor unit filter replacement time setting will be
displayed.
Value
Replacement display after 2000 hours
(Indoor unit Dip switch K6: Off)
Replacement display after 1000 hours
(Indoor unit Dip switch K6: On (Default))
3 Press the button to exit.
You will move to the menu selection display.
Note  P ress the
without setting.
and
Data
button anytime during setup to exit
buttons at the
Menu No.
Set value
21
E-