Monitoring the Indoor Unit Cycle Data
In order to monitor the indoor unit cycle data using the wired
remote controller, hold down the
same time for 5 seconds.
1
The menu will display .
Press the
button twice and the menu will display .
2
Press the
button.
The current set temperature(data #1) will be displayed.
3
Select the desired menu from 4 digits by using the
buttons.
The first digit represents the menu and the remaining
three digits are used for data display.
Data No.
Indoor temperature(°C)
EVA-IN temperature(°C)
EVA -OUT temperature(°C)
Indoor unit's EEV step
4
Press the
button to exit.
You will move to the menu selection display.
Note
P ress the
without setting.
and
Data
button anytime during setup to exit
buttons at the
Menu No.
Data No.
Cycle Data
17
E-