Making Settings For Voip Telephony - Siemens Gigaset S685 IP User Manual

3. Connect the base station to the
router (Internet)
For Internet access you need a router con-
nected to the Internet via a modem (this
may be integrated in the router).
2
1
1. Connect an Ethernet cable plug into
the LAN socket at the side of the base
station.
2. Then insert the second Ethernet cable
plug into a LAN socket on the router.
As soon as the cable connecting the
phone and router is plugged in and the
router is turned on, the key lights up on the
front of the base station (paging key).
You can now establish VoIP connections
within Gigaset.net (page 34).
Making settings for VoIP
telephony
Before you can use the Internet (VoIP) to
phone any other numbers on the Internet,
the fixed line network or the mobile
phone network, you need the services of a
VoIP provider who supports the VoIP SIP
standard.
Precondition: You have registered with
such a VoIP provider (e.g. via your PC) and
set up at least one VoIP account.
The following phone settings are neces-
sary in order for you to use VoIP. You can
obtain the following information from
your VoIP provider:
u
Your user name with the VoIP provider,
if this is required by the VoIP provider
u
Your registration name
u
Your password with the VoIP provider
u
VoIP provider general settings
The connection assistant will help you
with the settings.
Automatic configuration:
If your provider supports "automatic configu-
ration", you will receive an "auto configuration
code" from your provider instead of an authen-
tication name and password.
You will need to set the VoIP configuration
with the auto configuration code via the Web
configurator on the base station (see page 104
"Connecting PC with Web configurator" and
page 111 "Configuring the VoIP connection")
First steps
15