Querying The Phone Status - Siemens Gigaset S685 IP User Manual

Please note:
– The default time server
"europe.pool.ntp.org" will remain stored in
the base station even if you overwrite it. If
you delete your time server from the
Server field and synchronisation is still acti-
vated, the base station will return to syn-
chronisation with the default time server.
However, it will no longer appear in
the Time Server field.
– The base station will return to synchronisa-
tion with the default time server if you have
entered your own time server in the
field and the base station is unable to
Server
synchronise time and date for ten consecu-
tive attempts.
– If you have deactivated synchronisation
with a time server, and if the date and time
are not set on any handset, then the base
station will attempt to reference date and
time settings from the CLIP information of
an incoming call.

Querying the phone status

General information about your phone is
displayed.
¤
In the menu list, click the
The following information is displayed:
IP Configuration
IP address
The phone's current IP address within
the local network. For assigning the IP
address, see page 109.
MAC address
The phone's device address.
Software
Firmware version
Version of the firmware currently
downloaded. You can download
updates of the firmware on your phone
(page 98). Firmware updates are avail-
able on the Internet.
EEPROM version
Version of your phone's EEPROM stor-
age chip (page 162).
Time
Time
tab.
Status
Web configurator –configuring phone via PC
135