Toshiba E-Studio 5540c Troubleshooting Manual page 21

1.TROUBLESHOOTING FOR THE HARDWARE
2
Remove the jammed paper by turning the green dial.
3
Remove the jammed paper from the equipment.
4
Pull out the drawer of the External Large Capacity
Feeder and remove the jammed paper.
5
Check that there is no folded/curled paper or
overloading, and then close the drawer.
Be sure that the height of the stacked paper does not exceed the
line indicated on the rear side guide.
6
Connect the External Large Capacity Feeder to the
equipment.
Slowly move the External Large Capacity Feeder placing your hands
on the positions shown in the figure.
1 TROUBLESHOOTING FOR THE HARDWARE
2 2
1 1
Clearing a Paper Jam 19