Table of Contents
Advertisement
Removing and replacing the bezel
Complete the following steps to remove the bezel:
1. Press on the two tabs at the top edge of the bezel, and pull the top of the bezel
2. Press on the two tabs at the bottom edge of the bezel, and pull the bezel off the
Complete the following steps to replace the bezel:
1. Align the four tabs on the bezel with the slots in the server chassis.
2. Press firmly against the front of the bezel until it snaps into place.
slightly away from the server.
server. Store the bezel in a safe place.
Chapter 4. Installing options
85
Advertisement
Table of Contents
Troubleshooting
