IBM eServer xSeries 455 Type 8855 Hardware Maintenance Manual And Troubleshooting Manual page 133

xSeries 455
RXE Management Port
xSeries 455
RXE Management Port
1. Using an RXE Management cable, connect one end of the cable to the RXE
Management Port connector on one of the servers.
2. Connect the opposite end of the cable to the RXE Management A (in) Port
connector on the remote I/O enclosure.
3. Using an RXE Management cable, connect one end of the cable to the RXE
Management Port connector on the other server.
4. Connect the opposite end of the cable to the RXE Management A (in) Port
connector on the remote I/O enclosure.
Multi-node configurations: Complete the following steps to connect a remote I/O
enclosure to a two-node or four-node configuration.
Node 1
RXE Management Port
Node 2
RXE Management Port
Node 3
RXE Management Port
Node 4
B
RXE Management Port
1. Using an RXE Management cable, connect the RXE Management Port
connector on one server to the remote I/O enclosure.
RXE Management A
(in) Port
RXE Management B
(in) Port
RXE Management A
(in) Port
RXE Management B
(in) Port
RXE Management A
(in) Port
RXE Management B
(in) Port
Chapter 4. Installing options
123