IBM eServer xSeries 455 Type 8855 Hardware Maintenance Manual And Troubleshooting Manual page 24

v System Event and Error Log
v Save Settings
v Save Settings and Reboot
v Restore Settings
v Load Default Settings
14
IBM xSeries 455 Type 8855: Hardware Maintenance Manual and Troubleshooting Guide
– System Cache Control
Select this choice to enable or disable the Xcel4 cache.
– PCI Slot Information
Select this choice to configure and view information about the PCI-X slots and
devices in your server and those located in the remote expansion enclosure, if
one is attached.
– System Management Settings
Select this choice to set the server to restart automatically after a
nonmaskable interrupt (NMI) occurs. You can also enable the system to
assign the memory mapped I/O (MMIO) above 4 GB.
– Scalable Partition Settings
Select this choice to view a summary of current scalable partition settings and
to configure or delete partition settings.
Notes:
1. Partition settings are called partition descriptors in some IBM
documentation.
2. See "Configuring scalable partitions" on page 34 for more information
about creating, deleting, and configuring scalable partitions.
– Service Processor Information
Select this choice to view or change the service processor settings. For
example, you can view or change the IP address or gateway address.
Select this choice to view or clear the System Error Log and enable or disable
debug options. Use the debug options to define the severity level of messages
viewable during POST.
– View System Error Log
Select this choice to view the System Error Log. The System Error Log
contains all the system error and warning messages that the system has
generated. You can use the arrow keys to move between pages in the System
Error Log.
– Clear System Error Log
Select this choice to clear the System Error Log.
Select this choice to save the changes you have made in the settings (except
PCI-X Slot Information changes, Scalable Partition Settings changes, the date
and time, and password settings).
Select this choice to save the changes you have made in the settings (except
PCI-X Slot Information changes, Scalable Partition Settings changes, the date
and time, and password settings) and restart the server.
Select this choice to cancel the changes you have made in the settings (except
PCI-X Slot Information changes, the date and time, and password settings) and
restore the previous settings.
Select this choice to cancel the changes you have made in the settings and
restore the factory settings (except PCI-X Slot Information changes, the date and
time, and password settings).