Preparations; Setting The Camcorder/Recorder; Setting The Camcorder To Output The Rec/Stop Control Signals; Enabling The Wireless Lan Function Of The Camcorder/Recorder - Sony CBK-WA100 Operating Instructions Manual

Preparations

Setting the Camcorder/
Recorder
Setting the camcorder to output the
Rec/Stop control signals
Perform the setting of the camcorder so that it outputs
Rec/Stop control signals to the wireless adapter.
Select one of the following settings in "SDI Rec
Control" of the "Video Set" menu.
• HD SDI Remote I/F
Outputs the common Rec/Stop control signals for a
Sony camcorder. A proxy video is recorded on an SD
card in the wireless adapter by interlocking with the
main recording.
This can be used when no media is inserted into the
camcorder.
When the SDI signal is SD, Rec/Stop control signals
are not output.
• Parallel Rec
Outputs the signals that allow recording a proxy video
on an SD card in the wireless adapter by interlocking
with the main recording (only for a camcorder that is
compatible with the Parallel Rec function).
This can be used only when media is inserted into the
camcorder.
When "Match Clip Name" in the "Video Set" menu is
set to "On," the recorded proxy file name on the
wireless adapter is interlocked with the main
recording file name.
For PDW-750/850
• If "MAINTENANCE" > "CAM CONFIG 1" > "SDI
REC CONTROL" is set to "RM," a proxy video is
recorded on an SD card in the wireless adapter by
interlocking with the main recording. If
"MAINTENANCE" > "CAM CONFIG 1" > "SDI
REC CONTROL" is set to "PARA," the recorded
proxy file inherits the information and size from the
original file that is recorded on the camcorder.
• If "MAINTENANCE" > "CAM CONFIG 1" >
"MATCH CLIP NAME" is set to "ON," the recorded
proxy file name on the wireless adapter is interlocked
with the main recording file name.
Enabling the wireless LAN function
of the camcorder/recorder
Control the camcorder/recorder from a smartphone or
tablet by enabling the wireless LAN function on the
camcorder/recorder.
Perform the following settings in "Wi-Fi" of the
"Others" menu.
• Wi-Fi: Enable
• Wi-Fi Remote: On
For PDW-750/850
Set "MAINTENANCE" > "CAM CONFIG 3" > "Wi-
Fi" > "ETHER_RM."
• "RM": Only remote control operation is available (the
original file cannot be transferred).
• "ALL": Remote control operation and original file
transferring are available.
Note
When the USB cable is connected to the USB connector,
the "Wi-Fi" settings cannot be changed. Set the "Wi-Fi"
settings while the USB cable is disconnected.
Enabling the USB A connector of
the camcorder (PMW-300 only)
You need to change the USB A connector setting when
using the wireless adapter with the PMW-300.
Select "USB A" in "RM/USB A Sel" of the "Others"
menu.

Setting the Camcorder/Recorder

7