Connecting By Using A Lan Cable; Turning Off The Power - Sony CBK-WA100 Operating Instructions Manual

To connect
If the access point or smartphone/tablet is compatible
with the WPS function, connect the wireless adapter to
the Internet by performing procedures of "Connecting to
the access point with the WPS function" (page 10). If
the access point or smartphone/tablet is not compatible
with the WPS function, connect the wireless adapter to
the Internet by performing procedures of "To connect to
the access point in the STA mode without the WPS
function" (page 28).
Before connecting, turn the access point or smartphone/
tablet on, and activate its tethering function.

Connecting by using a LAN cable

You can connect the wireless adapter to the network via
LAN cable by attaching the optional USB-RJ45 adapter
CBK-NA1 to the wireless adapter. Connect the LAN
cable to the router.
For details about the network settings, see "Wired LAN
Settings" (page 29).
Note
The CBK-NA1 and modem cannot be used
simultaneously.

Turning off the Power

When the power switch is set to "1," the wireless
adapter is turned off and the power indicator is turned
off.
Turn the wireless adapter off before turning the
camcorder/recorder off.
Note
When you set the power switch to "1," the wireless
adapter is turned off instantly. If the settings of the
wireless adapter are changed, the settings are stored on
the internal memory instantly.
13
Turning off the Power