Electrical Adjustments; Preparations For Bd Board Adjustments - Sony BKM-21D Maintenance Manual

BKM-21D is an optional board for the BVM series
monitors and unable to operate on its own. To adjust and
measure it, BKM-21D must be mounted with a BVM
series monitor. The BVM series monitor used in these
adjustments should satisfy the respective specifications and
should equip with the software after versions (STATUS
MENU) mentioned below or higher.
Monitor Model No. Destination SoftwareVersion
BVM-20E1/14E1/14E5 J, U, E, A
BVM-20F1/14F1/14F5 J, U, E, A
BVM-20G1/14G1/14G5 J, U, E, A
BVM-D32E1W J, U, E, A
BVM-D24E1W J, U, E, A
BVM-D20F1 J, U, E, A
3-1. Preparations for BD Board
Adjustments
Mount the BKM-21D via the extension board.
. Unless specified otherwise, input the color bar signal
(100% WHITE REF 100% AMPL).
Set as follows in the INPUT CONFIGURATION menu of
the SETUP menu.
. 01 CH
FORMAT ............ NTSC-0
SLOT NO ............ n (Set to the slot number with the
BKM-21D inserted)
INPUT NO .......... 4
YC SEP ............... 3 LINES COMB
SYNC MODE ..... INT
APERTURE ........ OFF
FILTER ............... OFF
CONTROL .......... PRESET
H PHASE ............ 000
. 02 CH
FORMAT ............ PAL-S
SLOT NO ............ n (Set to the slot number with the
BKM-21D inserted)
INPUT NO .......... 4
Same as 01 CH for others
BKM-21D
http://getMANUAL.com
Section 3

Electrical Adjustments



1.40~

1.10~


1.20~

. 03 CH
FORMAT ............ PAL-D
SLOT NO ............ n (Set to the slot number with the
BKM-21D inserted)
INPUT NO .......... 4
Same as 01 CH for others
. 04 CH
FORMAT ............ YUV
SLOT NO ............ n (Set to the slot number with the
BKM-21D inserted)
INPUT NO .......... 456
SYNC MODE ..... INT
. 05 CH
FORMAT ............ RGB
SLOT NO ............ n (Set to the slot number with the
BKM-21D inserted)
INPUT NO .......... 456
SYNC MODE ..... INT
. 06 CH
FORMAT ............ SDI 422
SLOT NO ............ n (Set to the slot number with the
BKM-21D inserted)
INPUT NO .......... 1
SYNC MODE ..... INT
. 07 CH
FORMAT ............ SDI 422
SLOT NO ............ n (Set to the slot number with the
BKM-21D inserted)
INPUT NO .......... 2
SYNC MODE ..... INT
. 08 CH
FORMAT ............ SDI 422
SLOT NO ............ n (Set to the slot number with the
BKM-21D inserted)
INPUT NO .......... 3
SYNC MODE ..... INT
. 09 CH
FORMAT ............ SDI PAL-S
SLOT NO ............ n (Set to the slot number with the
BKM-21D inserted)
INPUT NO .......... 1
Same as 01 CH for others
3-1 (E)