Wps Button; Reset Button; Power Switch - Sony CBK-WA100 Operating Instructions Manual

F WPS button
Use for the WPS function.
You can set the connecting device and access point
semi automatically by using the WPS (Wi-Fi
Protected Setup) function.
G WIRELESS (wireless LAN mode setting) switch
Sets the wireless LAN mode of the wireless
adapter.
"AP": AP mode (Access point mode) (page 9)
"ST": STA mode (Station mode) (page 10)
H ST indicator
Lights in blue when the wireless adapter is in the
STA mode. (Turns off when the wireless adapter is
in the AP mode.)
Flashes in blue while the WPS function is running.
I REC indicator
Lights in red while recording on an SD card.
J STATUS indicator
Indicates the status of the wireless adapter.
STATUS
indicator
Off
Lights up in light
green
Flashes in light
green slowly (0.5
second intervals)
Flashes in light
green quickly (0.2
second intervals)
Flashes in red
slowly (0.5 second
intervals)
Flashes in red
quickly (0.2 second
intervals)
Lights in orange
Flashes in orange
slowly (0.5 second
intervals)
6
Location and Function of Parts
Status of the wireless
adapter
• Turned off
• During starting up
Turned on (during normal
condition)
Connecting in STA mode
Uploading the file
• The camcorder/recorder is
turned off
• No input from the SDI IN
connector
• There is a disturbance in the
input signal from the SDI IN
connector
• Error during initial setup when
starting up
• A wireless LAN module or
modem is not compatible with
the wireless adapter
• Unable to connect to the
Internet by using the modem
• Unable to connect to the
access point (during the STA
mode)
The upload has failed.
K RESET button
Returns the wireless adapter to the factory setting.
L Power switch
To turn the wireless adapter on, set to "@." To turn
the wireless adapter off, set to "1."
M Power indicator
Lights up in light green when the wireless adapter
is turned on.