Sony CBK-WA100 Operating Instructions Manual page 15

details, refer to the operating instructions of the
camcorder.
• If the wireless adapter and the camcorder are turned on
at the same time and you start recording on the
camcorder immediately, the length of a proxy file that
is recorded on an SD card differs from that of the
original file because there is a delay before the
wireless adapter starts recording.
• Interlocking recording is not available when the SDI
signal is SD.
To record by interlocking to the recorder
The recorder PMW-50/RX50 that is compatible the
wireless adapter can send the Rec/Stop control signals
by pressing the assignable button to which "Play&SDI
REC" is assigned, and the wireless adapter can record
the video/audio as the proxy file by interlocking to the
recorder's playback. (During the recording, the REC
indicator lights in red.)
When playback is stopped on the recorder, the wireless
adapter stops recording automatically. (The REC
indicator turns off.)
To record by interlocking to playback of
the camcorder
The camcorder PDW-850/750 that is compatible with
the wireless adapter can send Rec/Stop control signals
by pressing the assignable button to which "Play&SDI
REC" is assigned when playing a file on the camcorder,
and the wireless adapter can record the video/audio as a
proxy file on an SD card by interlocking to camcorder
playback. (During recording, the REC indicator lights in
red.)
When playback is stopped on the camcorder, the
wireless adapter stops recording automatically. (The
REC indicator turns off.)
Note
Interlock recording is not available when the playback
signal is SD.
To record manually
You can record manually the HD-SDI signals that do not
have the Rec/Stop control signals from the camcorder/
recorder or other devices.
In this case, the recorded file does not inherit the
information and size from the original file.
1
Connect the terminal device to the wireless adapter
via the wireless LAN, start the browser on the
terminal device, then access the wireless adapter
from the browser (page 9).
The "Device Status" screen appears.
"Lock" switch
Note
When other than the "Device Status" screen is
displayed, the setting menu appears by touching
at the upper left of the screen, then select
"Device Status" to display the "Device Status"
screen.
2
Touch "Rec."
The wireless adapter starts recording.
To stop recording, touch "Rec" again.
You can prevent misoperations by setting the
"Lock" switch to the right to lock "Rec."
Note
The "Rec" button operation is not available during
interlocking recording to the camcorder.
Using the "Content Browser Mobile"
application
You can perform manual recording by streaming the
playback video of the camcorder/recorder.
About the recorded file
The file system is FAT32 and the file extension is
".mp4."
The time code that is included on the HD-SDI signal is
also recorded on the files.
Recording the Video/Audio of a Camcorder/Recorder
"Rec"
15