Checking Files That Are Recorded On An Sd Card - Sony CBK-WA100 Operating Instructions Manual

About the file name
When recording by interlocking to a camcorder/
recorder that is compatible with the wireless
adapter
The file name is created as "<file name of the original
file> + S03.mp4."
When other than the above
The file name is created from the time code when
starting to record.
For example, when starting to record at 14:30:20:05, the
file name is "14_30_20_05.mp4." If there is the file of
the same name, a serial number is appended to the time
code.
Directory of the recorded file
The recorded file is stored in the "Root/PRIVATE/
PXROOT/Clip Directory" directory.
Notes
• When reaching the storage capacity of an SD card
during recording, an error message appears on the
screen, and the wireless adapter stops recording.
(When the camcorder is recording, the REC indicator
flashes.)
• The maximum number of files that can be recorded on
one SD card is 600. When reaching the maximum
number of files, the error message "Media Full"
appears on the screen, and the REC indicator flashes.
• When the wireless adapter detects an error of an SD
card (writing or reading error) during recording, an
error message appears on the screen. (When the
camcorder is recording, the REC indicator flashes.)
• When an SD card is write-protected, you cannot
record. An error message appears on the screen.
(When the camcorder is recording, the REC indicator
flashes.)
• When there is a disturbance in the input signal from
the SDI IN connector and cannot be recorded, the
wireless adapter stops recording and an error message
appears on the screen. (The STATUS indicator flashes.
When the camcorder is recording, the REC indicator
flashes.)
• When an SD card is not inserted, recording cannot be
performed. The error message "No Media" appears on
the screen. (When the camcorder is recording, the
REC indicator flashes.)
• During recording by interlocking to the Rec/Stop
control signals, the recording operation on the
"Device Status" screen is disabled.
• The special recording mode of the camcorder such as
the Frame Rec, Interval Rec function, etc., is not
compatible.
• If the file size is larger than 4 GB, the file is split and
"_01" is appended to the file name of the split file.
16
Recording the Video/Audio of a Camcorder/Recorder
Checking files that are recorded on
an SD card
The recorded files are listed on the "SD Card" screen.
You can play a file, delete a file, or format an SD card on
the "SD Card" screen.
1
Connect the terminal device to the wireless adapter
via the wireless LAN, start the browser on the
terminal device, then access the wireless adapter
from the browser (page 9).
The "Device Status" screen appears.
2
Touch " " > "Media Info" > "SD Card."
The "SD Card" screen appears.
3
Double touch the file that you want to play.
The selected file is played.
To delete a recorded file
1
Select the file that you want to delete from the list
on the "SD Card" screen.
Select the file by touching. To cancel, touch the file
again.
2
Touch at the upper right of the screen > "Delete."
The confirmation screen appears. Touch "OK" to
delete the selected file. Select "Cancel" to cancel
deleting.