Clearing The Password; Figure 12. Password Clear Jumper - Intel SE7520BD2 User Manual

Clearing the Password

If the user or administrator password(s) is lost or forgotten, install a jumper on jumper block J4H3
to remove both passwords. The Password Clear jumper must be removed before a new password(s)
can be set.
1. Power down the system and disconnect the AC power.
2. Open the server chassis.
3. Install the jumper on jumper block J4H3 as indicated in the following diagram.
4. Reconnect the AC power, power up the system.
5. Power down the system and disconnect the AC power.
6. Remove the Password Clear jumper.
7. Close the server chassis.
24
RECOVERY
BOOT
J4H1
J4H3
PASSWORD
CLEAR

Figure 12. Password Clear Jumper

Server Utilities
FRB
HALT
3
J4H2
TP00902