Pc Mode (Downloading Images To A Personal Computer); System Expansion Options - FujiFilm MX-1200 Owner's Manual

PC MODE ( DOWNLOADING IMAGES TO A PERSONAL COMPUTER )
DIGITAL Socket
Always switch your camera and personal computer
off before you begin. Connect the mini-plug on the
special cable into the DIGITAL input/output socket
on your camera. Then plug the other end of the
cable into your personal computer.
The AC Power Adapter AC-5V (sold separately)
should be used when you are downloading images.
If the power fails during data transmission, the data
cannot be downloaded correctly.
Personal Computer Connection Port
Windows : Any of COM1 to COM4
No USB port available.
64
Set the mode dial to " ", switch the camera on
and then start up the personal computer. Then
use the software to download images.
!
Check that the special cable is properly connected
before switching the camera and personal computer
on.
!
The Auto Power Off function does not operate in
" " PC mode. ( P.68)
!
Install the software before connecting the camera to
the personal computer. Do not use any cable other
than the special cable provided.
!
Refer to the Quick Start Guide for information on
installing the software.

System Expansion Options

By using the MX-1200 together with other optional Fujifilm products, your system can be expanded
to fill a wide range of uses.
MX-1200
Digital Camera
SmartMedia
( Floppy Disk drive )
Floppy Disk Adapter
( FlashPath )
( PC card slot )
PC CARD
ADAPTER
PC Card Adapter
PC Card
Reader
Image Memory Card Reader
TV monitor
( commercially available)
Serial Interface
NX - 70 Digital Printer
( SCSI )
( USB )
Personal Computer
(commercially available)
SmartMedia
5
65