Warning; Ec Declaration Of Conformity - FujiFilm MX-1200 Owner's Manual

Warning

For customers in the U.S.A.
FCC Statement
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two
conditions: ( 1 ) This device may not cause harmful
interference, and ( 2 ) this device must accept any
interference received, including interference that
may cause undesired operation.
CAUTION
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
2
off and on, the user is encouraged to try to correct
the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment
and receiver.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or
modifications not expressly approved in this manual
could void your warranty.
For customers in Canada
CAUTION
This Class B digital apparatus complies with
Canadian ICES - 003.
Please read the Safety Notes ( P.80 )
and make sure you understand them
before using the camera.

EC Declaration of Conformity

We
Fuji Photo Film ( Europe ) G.m.b.H.
Name :
Address : Heesenstrasse 31
40549 Dusseldorf, Germany
declare that the product
Product Name : DIGITAL CAMERA FUJIFILM MX-1200
Manufacture's Name : Fuji Photo Film Co., Ltd.
26 - 30, Nishiazabu 2 - chome, Minato - ku,
Manufacture's Address :
Tokyo 106-8620, Japan
is in conformity with the following Standards
Safety : EN60065
EMC : EN55022 : 1994 + amendement 1 Classe B
EN50082 - 1 :
1992
EN61000-3-2 : 1995
following the provision of the EMC Directive ( 89/336/EEC, 92/31/EEC
and 93/68/EEC ) and Low Voltage Directive ( 73/23/EEC ) .
Dusseldorf,Germany
Place
Bij dit produkt zijn batterijen geleverd. Wanneer deze leeg zijn, moet u ze niet
weggooien maar inleveren als KCA
October 1,1999
Date Signature/Managing Director
3