How To Specify Print Options; Dpof Set Frame - FujiFilm MX-1200 Owner's Manual

HOW TO SPECIFY PRINT OPTIONS

PLAYBACK MENU
With the MX-1200, you can order prints using the Digital Print Order Format (DPOF).
You can use the DPOF to specify the following:
The frames to be printed and the number of prints for each frame
Imprinting of the date and time
This section gives a detailed description of how to order your prints with the MX-1200.
Note that some printers do not support date and time imprinting or specification of the
number of prints.
Note that the warnings shown below may be displayed while you are specifying the
prints.
Frames specified for printing are automatically protected. To remove protection from
those frames, you must cancel the print specification.
If you load a SmartMedia that contains frames specified for printing on another
camera, those print specifications are all reset and replaced by the new print
specifications.
( P.75 )
No more than 999 prints can be specified on the same SmartMedia.
52
( P.75 )
( P.75 )

DPOF SET FRAME

PLAYBACK MENU
1
Set the Mode dial to " ".
Press the "MENU/EXE" button to display the
menu on the LCD monitor.
Press " " to select DPOF.
Select "FRAME" and press the "MENU/EXE"
button.
2
Use " " or " " to display the frame to be
specified.
Use " " or " " to specify the number of
prints.
!
Up to 99 prints can be specified for one frame. The
maximum number of prints that can be specified for
frames on the same SmartMedia card is 999.
!
Multi-frame playback is an easy way to select
images to be printed ( P.48).
4
53