Setting And Removing Single-Frame Protection - FujiFilm MX-1200 Owner's Manual

SETTING AND REMOVING SINGLE-FRAME PROTECTION

1
When you set the Mode dial to " ", the menu
appears on the LCD monitor.
Protection:
A setting that prevents images from being
inadvertently erased.
!
The protection cannot be cancelled for files specified
in the DPOF settings. Cancel the DPOF setting first.
60
( P.56)
2
Select "FRAME".
Press "MENU/EXE.
3
Use " " or " " to select the image to be
protected.
!
Multi-frame playback is an easy way to select
images ( P.48).
!
If you do not want to protect the frame, press "
the 4-way button.
4
When the "MENU/EXE" button is pressed, the
image is protected and the " " icon appears
on the right of the screen. To remove the
protection, press the "MENU/EXE" button again.
To finish setting and removing single-frame
protection, press the " " button.
!
To protect another image, repeat the procedure from
step 3 .
!
Formatting erases all images, including protected
" on
images. ( P.58)
5
61