Configuration (Standalone); Sound-Active Mode; Sound Sensitivity; Auto Programs - Chauvet Freedom Par Tri-6 User Manual

Configuration
(Standalone)
Sound-Active
Mode

Sound Sensitivity

Auto Programs

Program Speed

Selecting the
Dimmer Speed
Mode

Static Colors

Custom Color
Mixing
Freedom™ Par Tri-6 User Manual Rev. 1
Use standalone configuration to operate the product without a DMX controller. There are a variety of
Standalone modes and they are powerful tools for making exciting looks.
Never connect a product operating in a standalone mode (Static, Sound-Active, Auto, or Infrared)
to a DMX chain that includes a DMX controller. Products in a standalone mode can transmit DMX
signals that interfere with the DMX signals from the controller.
Sound-Active mode sets the product to respond to sounds and music.
To enable the Sound-Active mode, do the following:
1. Press <MENU> repeatedly until Snd shows on the display.
2. Press <ENTER>.
To set the sound sensitivity, follow the instructions below:
1. Press <MENU> repeatedly until SenS shows on the display.
2. Use <UP> or <DOWN> to select the desired sound sensitivity (u 0–u100, low to high).
3. Press <ENTER>.
The product will respond only to low frequencies of music (bass and drums).
If the product is not responding to sound, increase the sensitivity.
Auto programs set the product to 1 of 4 preset color programs.
To set the product to an auto program, do the following:
1. Press <MENU> repeatedly until P-- shows on the display.
2. Press <ENTER> and P 1–P 4 shows on the display.
3. Use <UP> or <DOWN> to select the desired auto program, P 1–P 4.
4. Press <ENTER>.
To set the auto program speed, follow the instructions below:
1. Press <MENU> repeatedly until S-- shows on the display.
2. Use <UP> or <DOWN> to select the desired auto program speed (S 1–S100, slow to fast).
3. Press <ENTER>.
To select a dimmer speed mode, do the following:
1. Press <MENU> repeatedly until dIM shows on the display.
2. Press <ENTER> and one of the following shows on the display:
·
OFF (dimmer speed off)
·
dIM1 (dimmer speed mode 1, fast speed)
·
dIM2 (dimmer speed mode 2, middle speed)
·
dIM3 (dimmer speed mode 3, slow speed)
3. Use <UP> or <DOWN> to select the desired dimmer speed mode.
4. Press <ENTER>.
To select a preset static color, do the following:
1. Press <MENU> repeatedly until C-- shows on the display.
2. Press <ENTER>.
3. Use <UP> or <DOWN> to select the desired preset color (C 1–C 7).
4. Press <ENTER>.
To custom mix a color, follow the instructions below:
1. Press <MENU> repeatedly until U-- shows on the display.
2. Press <ENTER> and one of the following colors shows on the display: rXXX (red), gXXX (green), or
bXXX (blue).
3. Press <ENTER> repeatedly to select the desired color.
4. Use <UP> or <DOWN> to select the desired color value (0–255).
NOTE: Selecting 0 will turn the color off.
5. Press <ENTER> to select color value and continue to the next color.
6. Repeat steps 3 to 5 until you create your desired color.
Page 17 of 22