Table of Contents
Advertisement
5. T
ECHNICAL
Product
Maintenance
Freedom™ Par Tri-6 User Manual Rev. 1
I
NFORMATION
Dust build-up reduces light output performance and can cause overheating. This can lead to reduction of
the light source's life. To maintain optimum performance and minimize wear, clean the product at least
twice a month. However, usage and environmental conditions may require more frequent cleaning.
To clean the product, follow the instructions below:
1.
Unplug the product from power.
2.
Wait until the product is at room temperature.
3.
Use a vacuum (or dry compressed air) and a soft brush to remove dust collected on the external
surfaces and vents.
4.
Clean all external optics and transparent surfaces with a mild soap solution, ammonia-free glass
cleaner, or isopropyl alcohol.
5.
Apply the solution directly to a soft, lint-free cotton cloth or a lens cleaning tissue.
6.
Softly wipe any dirt or grime to the outside edges of the external optics or transparent surface.
7.
Gently polish the external optics and transparent surfaces until they are free of haze and lint.
Always dry the lens surfaces carefully after cleaning them.
Page 19 of 22
Hide quick links:
Advertisement
Table of Contents
