Configuration
(Standalone)
Automatic Mode
Static Color Mode
Custom Static
Color Mode
Dimmer
Adjustment
SlimPANEL TRI 24 IP User Manual (Rev. 6)
Set the product in one of the standalone modes to control without a DMX controller.
1.
Connect the product to a suitable power outlet.
2.
Turn the product on.
Never connect a product that is operating in any standalone mode to a DMX string
connected to a DMX controller. Products in standalone mode may transmit DMX
signals that could interfere with the DMX signals from the controller.
To enable the Automatic Mode, follow the instructions below:
1.
Press <MENU> repeatedly until P-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to choose an auto program (P1-P5).
4.
Press <ENTER> to adjust the speed of the program.
5.
Use <UP> or <DOWN> to adjust the duration of each step of the automatic program
from S__1 (fast) to S100 (slow).
6.
Press <ENTER>.
To enable the Static Color Mode, follow the instructions below:
1.
Press <MENU> repeatedly until C-- shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to choose a color (C1-C7).
4.
Press <ENTER>.
To enable the Custom Static Color Mode, follow the instructions below:
1.
Press <MENU> repeatedly until U-- shows on the display.
2.
Press <ENTER> to choose between colors (r--, g--, b--).
3.
Press <UP> or <DOWN> to choose the intensity of the color (000-100).
4.
Repeat the steps to mix additional colors to create the color you need.
5.
Press <ENTER>.
You can also manually adjust the strobe rate. To do so, do the following:
1.
Press <MENU> repeatedly until U-- shows on the display.
2.
Press <ENTER> until S-- shows on the display.
3.
Press <UP> or <DOWN> to choose the strobe rate (S 0-S 20).
4.
Press <ENTER> once you have chosen your desired strobe rate.
You can manually control the dimmer speed to suit any need. To set up your preferred
dimmer speed, do the following:
1.
Press <MENU> repeatedly until DIM shows on the display.
2.
Press <ENTER>.
3.
Use <UP> or <DOWN> to choose between the dimming types (OFF-DIM3).
4.
Press <ENTER>.
Page 13 of 18