Connecting 115 Volts Input Power - Hobart Handler 125 EZ Owner's Manual

5-7. Connecting 115 Volts Input Power

Notes
.
A complete Parts List is available at www.HobartWelder.com
!
!
2
1
2
For 115 volt AC input power, a 20
1
ampere
protected by time-delay fuses or circuit
breaker is required.
Select extension cord of 12 AWG for up
to 50 ft (15 m) or 10 AWG for 50 up to
100 ft (30 m).
Work like a Pro!
Installation must meet all
National and Local Codes −
have only qualified persons
make this installation.
Special installation may be
required where gasoline or vola-
tile liquids are present − see NEC
Article 511 or CEC Section 20.
Plug From Unit
Receptacle − NEMA Type 5−15R
(Customer Supplied)
individual branch circuit
Input6 2011−03 804 122-C
Pros weld and cut
safely. Read the
safety rules at
the beginning
of this manual.
OM-923 Page 17