Connecting 1-Phase Input Power For 115 Vac Input; Installing Wire Spool And Adjusting Hub Tension - Hobart 210 MVP Owner's Manual

5-13. Connecting 1-Phase Input Power For 115 VAC Input

5-14. Installing Wire Spool And Adjusting Hub Tension

Installing 8 in. (203 mm) Wire Spool
Retaining ring used
with 8 in. (203 mm)
spool only.
Tools Needed:
.
A complete Parts List is available at www.HobartWelders.com
2
Installing 4 in. (102 mm) Wire Spool
Adapter used with 8 in.
(203 mm) spool only.
1/2 in.
! Installation must meet all National
and Local Codes − have only
qualified
installation.
! Always connect green or green/
yellow
grounding terminal first, and never
to a line terminal.
For 115 volts AC input power, a 20 ampere
individual branch circuit protected by
time-delay fuses or circuit breaker is
required.
1 Multi-Voltage Plug And Power Cord
Connector (NEMA Type 5−15P Plug
Shown)
For multi−voltage plug connections, see
1
Section 5-11.
2 Receptacle − NEMA Type 5−15R
(Customer Supplied)
When a slight force is needed
to turn spool, tension is set.
When a slight force is needed
to turn spool, tension is set.
persons make this
conductor to supply
Ref. 250 332-B
803 012 / 803 013 -B / Ref. 802 971-C
OM-260 274 Page 21