Power Key; Status Led; Touchscreen - NETGEAR Telstra Wi-Fi 4G Advanced II AirCard 790S User Manual

Power Key

Use the Power key to wake the hotspot and to power the device on and off.
Table 1. Power key usage
Desired Result
Turn on hotspot.
Turn off hotspot.
Wake up Wi-Fi signal and
screen.

Status LED

The LED indicates the device's connection status:
Table 2. LED indicator patterns
Color LED pattern
Slow blink 
Blue
(every five seconds)
Amber Blink
(every five seconds)
Blue Double blink
(every five seconds)
Blue / Slow blink, alternating
Amber blue and amber

Touchscreen

The hotspot's touchscreen displays the following information:
• Wi-Fi name and password.
• Network signal icons. See
• Data usage details.
• Wi-Fi details (number of connected devices).
• System alerts.
• Network provider message notification.
For advanced settings, use a Wi-Fi-enabled device to connect to the hotspot and then visit
the hotspot web page at
Telstra Wi-Fi 4G Advanced II
Action
Press and hold the Power key for three seconds.
Press and hold the Power key for five seconds.
Press and quickly release the Power key.
What the pattern means
The data connection is ready for use. The Wi-Fi is on,
WWAN is connected, and Wi-Fi devices are available.
The data connection is not ready for use (disconnected or
no signal).
Data is transferring (uploading or downloading) on the data
connection.
The device is installing firmware or software updates.
Table 3 on page 9 for details.
http://m.home or http://192.168.1.1.
Get Started
8