Connect To The Internet; Personalize The Hotspot - NETGEAR Telstra Wi-Fi 4G Advanced II AirCard 790S User Manual

Note: The battery comes partially charged and ready to use. When the
battery needs recharging, follow the instructions in
Battery

Connect to the Internet

Your computer and other devices can connect to the hotspot wirelessly. You can also connect
to the Internet with the hotspot tethered to a computer with the USB cable. See
Mode on page 16.

To connect to the Internet:
1. Press and hold the Power key for a few seconds.
The hotspot powers up and automatically searches for and connects to your network
provider's mobile broadband network.
2. Connect your computer or other device to your Wi-Fi network:
a. Check that Wi-Fi is enabled on your device and search for available Wi-Fi networks.
b. Select the Wi-Fi name displayed on the hotspot touchscreen and connect to it.
c. When prompted, enter your Wi-Fi password as it displays on the hotspot
touchscreen.
3. Launch your browser to surf the Internet.

Personalize the Hotspot

You can personalize the hotspot and change its settings using the following methods:
• Touchscreen. Use the touchscreen to make basic Wi-Fi and other settings changes.
• Web page. Use the hotspot web page to make more detailed settings changes than the
basic settings changes offered on the touchscreen.
Use a Wi-Fi-enabled device to connect to the hotspot and then use a browser to display
the hotspot web page
make changes. The default administrator login password is admin. Best practice is to set
a more secure password.
Telstra Wi-Fi 4G Advanced II
on page 59.
(http://m.home
Get Started
Recharge the
or http://192.168.1.1). Log in as an administrator to
15
Tethered