Install The Battery - NETGEAR Telstra Wi-Fi 4G Advanced II AirCard 790S User Manual

Install the Battery


To install the battery:
1. Remove the hotspot back cover by lifting at the notch on either corner of the device.
Make sure that the micro SIM card is already installed. For more information, see
the Micro SIM Card
2. Insert the battery as shown.
Ensure that the gold contacts on the battery line up with the gold contacts on the device.
3. Replace the back cover.
Telstra Wi-Fi 4G Advanced II
on page 13.
Micro SIM card
Get Started
14
Battery
Gold contacts
Install